SPCD
Defines an enforced displacement value.
| 1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
| SPCD |
SID |
G1 |
C1 |
D1 |
G2 |
C2 |
D2 |
|
|
Fields
| Field |
Contents |
| SID |
Load set identification number. (Integer > 0) |
| Gi |
Grid or scalar point identification number. (Integer > 0) |
| Ci |
Component number. (0 ≤ Integer ≤ 6; up to six Unique Integers, 1 through 6, may be placed in the field with no embedded blanks. 0 applies to scalar points and 1 through 6 applies to grid points.) |
| Di |
Value of enforced motion for all degrees-of-freedom designated by Gi and Ci. (Real) |
- The set ID of the SPCD entry (SID) is selected by the LOAD Case Control command.
- A global coordinate (Gi and CI) referenced on this entry must also be referenced on a SPC or SPC1 Bulk Data entry and selected by the SPC Case Control command.
- Values of Di will override the values specified on an SPC Bulk Data entry, if the SID is selected as indicated above.
- The LOAD Bulk Data entry will not combine an SPCD load entry.
- Rotational degrees of freedom are in radians.